aluminum alloy sheet
"
Επίπεδο πιάτο αργιλίου 1060 για την αυτοκινητική διέλευση κατασκευής και ραγών
Eorrosion Proof 1060 H*2/H*4/T4/T6 Aluminum Plate Used in Automobile Manufacturing and Rail Transit. 1.Introduction As aluminum reserves in the crust is very rich, It has more advantages over other metals. Aluminum in the future will still have a wide range of applications, for example, the car manufacturers are currently exploring the use of aluminum instead of steel, and make the car lighter. With the progress of technology, aluminum products not only in the aerospace,
5182 μέτριο πιάτο αργιλίου δύναμης, κατεψυγμένο πιάτο αλουμινίου 10mm
5182 Moderate Strength Aluminum Alloy Plates / Sheets for Refrigerated Plate 5182 Aluminum Alloy Plate is one of our best selling products,which has a wide range of usage,because 5182 alloy has good corrosion resistance, excellent weldability, good cold processing, and has a moderate strength, therefore,5182 alloy is widely used for tank truck plate/refrigerated plate/container board/square cabin body panel/car door/fender/floor/body frame/covering parts etc. Product features
Καυτός - τελειωμένη λουρίδα πτερυγίων σπειρών φύλλων αργιλίου κυλώντας μύλων για Intercooler
Hot - Rolling Mill Finished Aluminum Sheet Coil Fin Strip For Intercooler Application: Heat-Exchange Materials of Intercooler, Radiator, Oil Cooler,Evaporator,Condenser,Air Cooler widely use our Aluminum Fin Strip. We can recommend relevant products or give good suggestions according to customers' requests and our experiece. Specification of aluminum fin strip: No. Specification Details 1 Core Alloy 1060, 3003, etc 2 Cladding alloy 4343, 4045, 7072, 5052 etc 3 Cladding rate 4
Προσαρμοσμένο βαρέων καθηκόντων υλικό αργιλίου κρύων αλυσίδων ρόλων φύλλων αλουμινίου αλουμινίου συγκολλώντας
1.Specification of aluminium strip: 1) Core Alloy: 1060, 3003, 5052 etc 2) Cladding alloy: 4343, 4045, 7072, 5052 etc 3) Cladding rate: 4%-18% 4) Thickness: 0.2-3.0mm 5) Width: 12 - 1250mm (max) 6) Temper: HO, H14 etc 7) I. D.: 150mm, 200mm, 300mm, 400mm, 500mm 8) Normal O. D.: 900-1450mmm 9) Other sizes is available according to customer's request 2.Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite
φύλλο αλουμινίου 1.5mm παχύ σύνθετο ντυμένο χρώμα για τις αυτοκίνητες εφαρμογές
Aluminium brazing material production Complex assemblies can be turned into single unit by just one pass through a brazing furnace & period; Aluminium brazing facilitates the joining of parts with a near-eutectic Ai-Si filler alloy, the liquid temperature which is about 50C lower than that of the core & period; In serial heat exchanger production the filler alloy is supplied via a thin clad on a core alloy; Compound Material Aluminium brazing material is a sophisticated multi
0,1 X 271mm 3003 + Unclad πτερύγιο αργιλίου 1.5%Zn + Zr H16 αντι-κρεμώντας για το θερμαντικό σώμα
0.1 x 271mm 3003 + 1.5%Zn + Zr H16 Anti-sagging Aluminum Unclad Fin for Radiator 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn+Zr 0.5
Βιομηχανικός τυπωμένος ρόλος φύλλων αλουμινίου αργιλίου, λουστραρισμένο με λάκκα πρόσθετο παχύ φύλλο αλουμινίου αργιλίου
0.08 x 62mm 4343/3003+1.5%Zn+Zr/4343 H16 Aluminum Foil Roll for Automotive Radiator Fin 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn
Κενή ΤΑΥΤΌΤΗΤΑ συγκόλλησης 305mm φύλλων αλουμινίου ρόλων/πτερυγίων φύλλων αλουμινίου αργιλίου συγκόλλησης χρήσης συμπυκνωτών.
0.10 x 18mm 4343 / 3003+1.5%Zn / 4343 H14 Aluminum brazing Foil Roll for Condenser 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn+Zr 0
1050 / κύκλος 1100/3003 αργιλίου καυτού κυλίσματος γύρω από το κομμάτι για τη μαγειρεύοντας βιομηχανία
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Industry Product Description: 1. Alloy: 1050, 1060, 1100, 3003 2. Temper: O-H112 3. Thickness: 0.5-8.0mm 4. Diameter: 100-1000mm 5. Tolerance of Thickness:±0.05mm 6. Tolerance of Diammeter:-0.05~+0.10mm 7. Surface Treatment: Mill Finish 8. MOQ: 5MT per Size 9. Leadtime: 15-30 Days 10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY
